Reviewing Caller Id Records; Caller Id Messages; Adding/Deleting The Area Code - Radio Shack 43-3514 Owner's Manual

&DOO#'URSSHG &DOO#'URSSHG &DOO#'URSSHG &DOO#'URSSHG
3. Press .
SELECT
your phone.
REVIEWING CALLER ID
RECORDS
1. To review the Caller ID records, lift the
handset and press
new Caller ID records, if any, and the
total number of records appear.
Note: If the handset is faceup on the
base, it shows the number of Caller ID
records, so you can see if you have new
records to review.
2. Repeatedly press
VOL/CID
through the Caller ID records from the
newest to the oldest, or
scroll back through the records. To scroll
quickly through the records, hold down
8 8 8 8 9 9 9 9
or .
VOL/CID
When you scroll past the last record, the
total record number appears, then the
first record. When you scroll past the
first record, the total record number
appears, then the last record.
The top line of each record shows the
date, time and the number of calls from
that number. The second line shows the
caller's name, and the third line shows
the caller's phone number.
3. To exit the Caller ID record display,
press .
CID
appears on
. The number of
CID
9 9 9 9
to scroll
8 8 8 8
to
VOL/CID
Caller ID Operation

Caller ID Messages

Display
1HZ 1HZ= = = = #;;# #;;#
1HZ 1HZ #;;# #;;#
Shows the number of new
7RWDO=#;; 7RWDO=#;;
7RWDO=#;; 7RWDO=#;; Caller ID records (records you
have not reviewed) and the
total number of records.
3ULYDWH#1DPH# 3ULYDWH#1DPH#
3ULYDWH#1DPH# 3ULYDWH#1DPH#
The caller has blocked the
3ULYDWH# 3ULYDWH# 3ULYDWH# 3ULYDWH#
or Caller ID information.
1XPEHU 1XPEHU 1XPEHU 1XPEHU
8QNQRZQ#1DPH 8QNQRZQ#1DPH
8QNQRZQ#1DPH 8QNQRZQ#1DPH
The caller is not within a Caller
8QNQRZQ# 8QNQRZQ# 8QNQRZQ# 8QNQRZQ#
or ID service area.
1XPEHU 1XPEHU
1XPEHU 1XPEHU
,QFRPSOHWH# ,QFRPSOHWH# ,QFRPSOHWH# ,QFRPSOHWH#
Appears if there was an error
'DWD 'DWD 'DWD 'DWD
during the transmission of
Caller ID information. Occa-
sional errors are normal. If
, , , , QFRPSOHWH#'DWD QFRPSOHWH#'DWD
QFRPSOHWH#'DWD QFRPSOHWH#'DWD
appears, contact your local
telephone company or
RadioShack store.
ADDING/DELETING THE
AREA CODE
When the area code of the received call is
the same as the one you stored (see "Storing
Your Area Code" on Page 11), the caller ID
record does not show the area code. If it is
different, the record shows the area code.
However, you can add or delete the area
code on the display. When the record is on
the display, press to add or delete the area
3
code. Pressing again deletes or adds the
3
area code.
When you dial the number or store it into
memory, the phone dials or stores the num-
ber as it appears on the display.
Description
frequently
19