Using The Matrox Mxo2 Thunderbolt Adapter - Matrox MXO2 Installation And User Manual

Using the Matrox MXO2 Thunderbolt adapter

Use the Matrox MXO2 Thunderbolt adapter to connect MXO2 to your
computer's Thunderbolt port. When doing this, it may take up to ten seconds for
your MXO2 to be detected by your system and its applications.
¡ Important Make sure that the Matrox PCIe cable is connected to the adapter
and MXO2 before connecting the adapter to your computer via the Apple
Thunderbolt cable. If you want to disconnect or connect MXO2 when your
system is running, you must do it by disconnecting/connecting the Apple
Thunderbolt cable. Do not disconnect the Matrox PCIe cable from the adapter, or
MXO2, when your Mac system is running.
PCIe cable
²Caution
damaging the PCIe cable or host connector, you
must connect the PCIe cable as shown in
"Ensuring proper PCIe cable connection"
page 14.
Matrox MXO2
Thunderbolt adapter
Connecting MXO2 to your Mac system
MXO2
(side view)
To ensure functionality and avoid
Apple Thunderbolt cable
(Not included. An Apple
Thunderbolt cable
purchased from Apple is
required to connect the
Matrox MXO2 Thunderbolt
adapter to your computer.)
To your computer's
Thunderbolt port.
15
on