Removing Your Matrox Mxo2 Software - Matrox MXO2 Installation And User Manual

has an incompatible firmware version when you later connect the MXO2
hardware to your Mac system, the Matrox preferences window options will be
unavailable and a message regarding the incompatibility between the MXO2
software and MXO2 firmware will appear on the Info pane (see
information"
To update the MXO2 firmware from the Matrox preferences window, make sure
your MXO2 hardware is powered and connected to your computer, and then click
Launch firmware updater
Updater. You'll be required to shut down your system, with your MXO2 powered
and connected to your computer, to complete the firmware update. If updating the
firmware for Matrox MXO2 Mini, you must unplug your MXO2 Mini from the
AC outlet, and then re-plug it before restarting your system.
²Caution Do not disconnect or power off MXO2, or interrupt the firmware update
during the update process. Doing so may damage your MXO2 hardware.
Alternately, you can update your MXO2 firmware by running the Matrox
firmware updater from the Finder window as follows:
With your Mac system shut down, supply power to your MXO2, and connect
1
it to your Mac system.
Start your computer.
2
In the Finder menu, choose File > New Finder Window .
3
In the Applications folder, click the Matrox utilities folder, and then
4
double-click the firmware updater file to run the Matrox Firmware Updater.
You'll be required to shut down your system, with your MXO2 powered and
connected to your computer, to complete the firmware update. If updating
the firmware for Matrox MXO2 Mini, you must unplug your MXO2 Mini
from the AC outlet, and then re-plug it before restarting your system.

Removing your Matrox MXO2 software

Perform the following steps to remove the MXO2 software from your Mac
system.
In the Finder menu, choose File > New Finder Window .
1
In the Applications folder, click the Matrox utilities folder, and then
2
double-click the software uninstaller file.
In the uninstaller dialog box, select or clear the Delete the Matrox
3
software user preferences
in the Matrox preferences window will be removed from your computer.
Clear this option if you wish to keep your current MXO2 user settings for a
future MXO2 software installation.
Click Continue .
4
on page 74), along with a Launch firmware updater button.
on the Info pane to run the Matrox Firmware
option. When selected, all current user settings
Removing your Matrox MXO2 software
"Viewing MXO2
9