Guarantee Or Warranty - impro IMPROX TT Installation Manual

10. Reconnect the mains power supply to the Power Supply Combo.
ImproX TT Address Information
Each ImproX TT Terminal is, in fact, two Terminals in one. The first "Terminal" Fixed
Address is associated with Reader [1], and the second with Reader [2].
Each ImproX TT is allocated two unique Fixed Addresses at the factory. These
addresses are stored in the Terminal‟s memory. When the Terminal is installed in an
IXP220 or IXP300/400 System, the System allocates two separate Logical Addresses
to the Terminal for Communication purposes.
On release of the ImproX TT‟s Firmware V7.12 we imposed the following rules:

If you have no Antenna Reader connected to the ImproX TT, the Terminal reveals
both Fixed Addresses.

If you connect only Antenna Reader 1, the Terminal reveals Antenna Reader 1‟s
Fixed Address.

If you connect both Antenna Readers, the Terminal reveals both Fixed Addresses.

If you connect only Antenna Reader 2, the Terminal reveals both Fixed Addresses.
NOTE: If you are only using one Antenna Reader then use Antenna Reader 1. The
ImproX TT will then reveal only one Fixed Address. In all other
arrangements the Terminal reveals two Fixed Addresses.
Address Allocation – IXP220, IXP300 and IXP400 Systems
IXP Software Suites allocate Logical Addresses to the Terminal, either on initial
software start-up, or on request, depending on the system configuration.
Address Allocation OEM Systems
In an OEM system, the Terminal‟s Logical Addresses are allocated individually using
commands available in the ImproX Secure Communications Protocol. Details of this
process are described in the ImproX Secure Communication Protocol Document.
Fixed Address Label
1. Once the ImproX TT is installed, sketch a rough site plan.
2. Attach the loose additional Fixed Address Label, packaged with the Terminal, in
the position of the Terminal on the sketched site plan.
When the system installation is complete and all the units are represented on the site
plan by their Fixed Address Labels, file the site plan for future reference.

GUARANTEE OR WARRANTY

CAUTION: We reserve the right to nullify the products guarantee or warranty
where you have not properly installed the Metal-oxide Varistors.
This product conforms to our Guarantee or Warranty details placed on our Web Site, to
read further please go to www.impro.net.
XTT300-0-0-GB-16 January 2011 Page 12