Table of Contents
Advertisement
2) SLEEP TIME SETUP
(1) Go to 2.Sleep Time Setting using *(←) and #(→) Key and then press ENTER.
(2) Select 1.ON or 2.OFF using *(←) and #(→) Key and then press ENTER.
(3) Sleep Time is displayed and default Sleep Time is 12:00 AM.
(4) Input hour(1-12) and then press ENTER.
(5) Input minute(00-59) and then press ENTER.
(6) Select AM/PM using *(←) and #(→) Key and then press ENTER.
(7) The screen moves to Menu Options screen.
3) RANGE TEST SETUP
(1) Go to 3.Range Test using *(←) and #(→) Key and then press ENTER.
(2) Using *(←) and #(→) Key, select 1.ON & 2.OFF and then press ENTER.
(3) Testing Range is displayed and transmit the range test signal.
(4) The screen moves to Menu Options screen.
※ To return to Menu Options on the process, input CANCEL.
4) Pre-Set Message SETUP
(1) Go to 4.Pre-Set Msg using *(←) and #(→) Key and then press ENTER.
(2) Go to 1.PreSet Msg:ON/OFF using *(←) and #(→) Key, and then press ENTER.
(3) Select 1.ON or 2.OFF using *(←) and #(→) Key.
(4) The screen returns to Menu Options screen.
# To set the Pre-Set Default Message.
(5) Go to 4.Pre-Set Msg using *(←) and #(→) Key and then press ENTER.
(6) Go to 2.PreSet Default Msg using *(←) and #(→) Key, and then press ENTER.
(7) Input the Pre-Set Default Message and then press ENTER.
(8) The screen returns to Menu Options screen.
※ To return to Menu Options on the process, input CANCEL.
5) PAGER ALERT SETUP
(1) Go to 5.Set Pager Alert and then press ENTER.
(2) Select one among "Set Pager Alert:" list using *(←) and #(→) Key, and then press ENTER.
(3) "Are All Pagers Returned??" is displayed and then press ENTER.
Advertisement
Table of Contents
