Lee Technology LTK-1400AH User Instruction Manual page 4

Ⅰ. PREFACE
Pager transmitter, LTK-1400A is the desktop paging system capable of addressing more than 1000 pagers
with Alpha message or Numeric message. It consists of a fully featured encoder with a large 4 line by 64 chara
-cter LCD display.
Ⅱ.TURNING THE TX ON/OFF
* Plug the Pager Transmitter A/C Adaptor into the Pager Transmitter and then into a standard 110 outlet.
* And the initial LCD screen is as below.
INITIALIZING
Reading Setup
1/1
Ⅲ. SEND A PAGE
1. NUMERIC MESSAGE
(1) Input "1" in initial screen and then press ENTER.
(2) Go to 1.NUMERIC TYPE using *(←) and #(→) Key and then press ENTER.
(3) Input message in ENTER MESSAGE(Maximum available up to 16 characters) and then press ENTER.
(4) Transmit message and return to initial screen. (Sending Message Please Wait)
※ To return to an initial screen(1/3) on the process, input CANCEL.
2. ALPHA MESSAGE
(1) Input "1" in initial screen and then press ENTER.
(2) Go to 2.ALPHA TYPE using *(←) and #(→) Key and then press ENTER.
(3) Input message in ENTER MESSAGE (Maximum available up to 128 characters) and then press ENTER.
(4) Transmit message and return to initial screen. (Sending Message Please Wait)
PAGER TRANSMITTER
Alpha Transmitter
ROM Ver.: V1.00
1/2
ENTER PAGER NUMBER:
>
12:00AM
SETUP:ESC
1/3(Initial screen)