Touchpad - HP Chromebook 11 G6 EE Maintenance And Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is included in
the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Description
TouchPad
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the TouchPad:
1. Release the shielding material (1) that covers the top edge of the TouchPad.
2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to
the keyboard/top cover with double-sided adhesive.)
3. Remove the three Phillips M2.0×2.7 screws (3) that secure the TouchPad and TouchPad bracket to
the keyboard/top cover.
4. Remove the three Phillips M2.0×2.2 broad head screws (4) that secure the TouchPad to the keyboard/
top cover.
5. Remove the TouchPad bracket (5).
The TouchPad bracket is available using spare part number L18300-001.
24 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
L14922-001
20).