Maintenance; Copyright, Etc; About Bluetooth - Panasonic RP-BTS10 Operating Instructions Manual

Digital wireless stereo earphones
Hide thumbs Also See for RP-BTS10:
Table of Contents

Advertisement

Maintenance

Clean this unit with a dry and soft cloth.
• Do not use solvents including benzine, thinner, alcohol, kitchen detergent, a
chemical wiper, etc. This might cause the exterior case to be deformed or the
coating to come off.
Keeping the battery performance
• During the long period of disuse, full charge this unit once every 6 months to
keep the battery performance.

Copyright, etc.

The Bluetooth
word mark and logos are registered trademarks owned by
®
Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is
under license.
Other trademarks and trade names are those of their respective owners.
Other system names and product names appearing in this document are in
general the registered trademarks or trademarks of the respective developer
companies.
Note that the ™ mark and ® mark do not appear in this document.

About Bluetooth

Panasonic bears no responsibility for data and/or information that is
compromised during a wireless transmission.
Frequency band used
This unit uses the 2.4 GHz frequency band.
Certification of this unit
• This unit conforms to frequency restrictions and has received certification
based on frequency laws. Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some countries:
– Taking apart/modifying the unit.
– Removing specification indications.
Restrictions of use
• Wireless transmission and/or usage with all Bluetooth
not guaranteed.
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it can fail to connect
or some operations can be different.
• This system supports Bluetooth
®
operating environment and/or settings, this security may not be sufficient.
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
Range of use
Use this unit at a maximum range of 10 m.
The range can decrease depending on the environment, obstacles or
interference.
Interference from other devices
• This unit may not function properly and troubles such as noise and sound
jumps may arise due to radio wave interference if this unit is located too close
to other Bluetooth
devices or the devices that use the 2.4 GHz band.
®
• This unit may not function properly if radio waves from a nearby broadcasting
station, etc. is too strong.
Intended usage
• This unit is for normal, general use only.
• Do not use this system near an equipment or in an environment that is
sensitive to radio frequency interference (example: airports, hospitals,
laboratories, etc.).
®
equipped devices is
®
security features. But depending on the
device.
®
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents