Listening To Music - Panasonic RP-BTS10 Operating Instructions Manual

Digital wireless stereo earphones
Hide thumbs Also See for RP-BTS10:
Table of Contents

Advertisement

Connecting a paired Bluetooth
1
Turn on the unit
• Press and hold the power button of this unit for approx. 3 seconds until the
LED (blue) blinks.
• A beep will sound, and the LED (blue) will blink slowly.
2
Perform steps 2 and 3 of "Pairing (Registration) this unit with the
Bluetooth
device for connection" (→ P. 5)
®
• When the LED (blue) blinks twice every approx. 2 seconds, pairing
(registration) is completed. (Connection established)
Note
• This unit remembers the device lastly connected. Connection may be
automatically established after step 1 (see above).
• If connection to a device is not established within approximately 5 minutes, the
unit will be turned off. Perform pairing again. (→ P. 5)
device
®

Listening to music

If the Bluetooth
compatible device supports the "A2DP" and "AVRCP" Bluetooth
®
profiles, music can be played back with remote control operations on the unit.
• A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.
• AVRCP (Audio/Video Remote Control Profile): 
Allows remote control of the device using the unit.
1
Connect the Bluetooth
device and the unit (→ P. 5)
®
2
Select and play the music on the Bluetooth
• The selected music is output to the earphones of the unit.
Operating time of battery
Battery type
Rechargeable battery (installed in the unit)
Operating time may be less depending on the operating conditions.
Attention
• The unit might leak sound depending on the volume level.
• When the volume is increased to near maximum level, music may sound
distorted. Decrease the volume until the distortion is cleared.
Remote controlling
You can control the Bluetooth
device using the unit.
®
• Depending on Bluetooth
devices, some functions below do not work, or work
®
differently via operation of the unit.
(Operation example)
Play / Pause / Call
Press
Play / Pause / Call
Reject the incoming
Press twice
call / Switch the calling
quickly
device
Previous / Next / Volume
Press
Increase the volume
+
Press and
Forward to the start of
hold
next track
Press
Decrease the volume
Press and
Return to the start of
hold
current track
Note
• The volume can be adjusted in 15 levels.
When the maximum or minimum volume is reached, a beep will sound.
• "Increase/Decrease the volume" function is not available while pause.
®
device
®
Operating time
Approx. 4 hours 20 minutes
Remote controller
Volume + / Next
Play / Pause / Call
Volume – /
Previous
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents