DASAN KYS DKC1001 User Manual page 14

CHECK FAILED
In order to know if the node is broken, checking function can be used. Only failed node
can be removed without user interaction on the device.
REMOVE FAILED
A failed node can be removed immediately. If the node is a failed node, it can be
removed as soon as the button is selected.
REPLACE FAILED
A failed node can be replaced to the new device. Once the replace failed node is
activated, the replacing device should be entered to the learn mode.
Command Panel
Z-Wave commands can be sent with various values in the panel.
MultiChannel

If the node support multi-channel commands, the sending command can be
encapsulated with the multi-channel encapsulation command. If 'MutlChannel' is
checked, the destination endpoint can be inputted.
Command Class

A command class can be selected in the command classes which the node
supports.
DK-DKC1001-001
Page 14
DKC1001 USER MANUAL
DASANKYS Proprietary & Confidential
March, 2017