Table of Contents
Advertisement
DKC1001 USER MANUAL
Controller functions
When a controller panel is selected in the node list, controller function menus are
displayed. Using function buttons, you can control Z-Wave controller functions.
ADD
Add a node to the Z-Wave network. It is used for nodes which can communicate to the
controller directly. If it is not, please use 'network wide inclusion' function instead.
REMOVE
Remove a node from the Z-Wave network. The removing node should be entered to the
learn mode.
DK-DKC1001-001
DASANKYS Proprietary & Confidential
Page 12
March, 2017
Advertisement
Table of Contents
