Table of Contents
Advertisement
DKC1001 USER MANUAL
Node list
If the gateway is found, all Z-Wave nodes which are joined to the controller network are
displayed. It shows that the node numbers and the generic device types.
The controller panel shows its model name and IP address which can be used to check
video or network connectivity.
If the controller panel is selected, you can use Z-Wave controller functions. And if a
specific node is selected, Z-Wave commands can be sent to the node.
DASANKYS Proprietary & Confidential
DK-DKC1001-001
March, 2017
Page 11
Advertisement
Table of Contents
