Sending Commands - DASAN KYS DKC1001 User Manual

DKC1001 USER MANUAL
REPLICATION
Include another controller and transfer the Z-Wave network data to it.
All the Z-Wave devices will be replicated into the new controller.
This is used to transfer data from one controller to another.
LEARN
Let the controller be added to other Z-Wave network, or be removed from the existing
Z-Wave network – if it is a secondary controller or inclusion controller. And the controller
receives network protocol data from other Controllers in inclusion process.
RESET
Factory-Reset the controller functions and Z-Wave network information.
If this controller is the primary controller for your network, resetting it will result in the
nodes in your network being orphaned and it will be necessary after the reset to exclude
and re-include all of the nodes in the network. If this controller is being used as a
secondary controller in the network, use this procedure to reset this controller only in
the event that the network primary controller is missing or otherwise inoperable.
ABORT
Let the controller abort the current running function if it is possible.

Sending commands

When a node is selected in the node list, Z-Wave commands which the node supports
can be sent to the node. Besides sending commands, the node panel provides some
functions to handle a failed Z-Wave node.
DASANKYS Proprietary & Confidential DK-DKC1001-001
March, 2017 Page 13