Table of Contents
Advertisement
Getting started
Installation
You must install the
telephone before use.
Install the telephone base close to a telephone jack. The telephone base can
be placed on a flat surface or vertically mounted on the wall (see page 5). For
optimum range and better reception, place the telephone base in a central and
open location.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a DSL filter between the telephone
line cord and the telephone wall jack (see page 4). The filter prevents noise and
caller ID problems caused by DSL interference. Please contact your DSL service
provider for more information about DSL filters.
Your product may be shipped with protective stickers covering the handset and
telephone base displays - remove them before use.
For customer service or product information, visit our website at
www.telephones.att.cn
Avoid placing the telephone base too close to:
•
Communication devices such as television sets, VCRs, or other
cordless telephones.
•
Excessive heat sources.
•
Noise sources such as a window with traffic outside, motors, microwave ovens,
refrigerators, or fluorescent lighting.
•
Excessive dust sources such as a workshop or garage.
•
Excessive moisture.
•
Extremely low temperature.
•
Mechanical vibration or shock such as on top of a washing machine
or workbench.
STOP!
400-022-9929
or call
1
See page 4 for
easy instructions.
.
Advertisement
Table of Contents
