Mounting Instruction - Bosch 8750000003 Instruction Manual

6.2 Mounting instruction

Make sure that the Door/Window Contact and
the magnet unit are flush (using the enclosed
spacer where necessary) and that the bottom
edges are level. If correctly aligned, the LED will
flash briefly. The bottom edges of the devices
should be level with each other.
The Door/Window Contact and the magnet
unit can be glued or screwed to the window.
Instructions on how to do so on the following
pages.
26
The distance between magnet unit and
Door/Window Contact must be no more
than 8 mm.
max. 8 mm
Maintain the minimum distance to the surroundings (1.5 cm) when
mounting the Door/Window Contact so that it can still be slid together.
27