Ketra N4 Installation Manual page 12

STEP 3
CONNECT THE HUB TO THE LAN (LOCAL AREA NETWORK)
There are two methods of doing this, shown below. Choose the one that best fits the needs of the installation. Once a
connection is detected, the N4's Ethernet indicator,
OPTION 1: DIRECT CONNECTION TO MODEM OR ROUTER.
N4
Fig. 8
• Use a CAT5 or equivalent Ethernet cable
• Cable can be no more than 100 m (328 ft)
PAGE 12
, will come on white.
Use either RJ45 port
CAT5 or equivalent
Ethernet cable
Modem /
Router
770-000027-01 r15 N4 INSTALLATION GUIDE