Table of Contents
Advertisement
CNT-IP-264
Accessing Web manager
The Model CNT‐IP‐2 device comes preconfigured for DHCP IP addressing.
To find the current IP address of the device, download and install the
Device Finder utility available on Hall Research Website.
This software can run on both Windows and MAC computers.
NOTE
We recommend that you set a static IP on each system in order to
guarantee it the same IP address between system power cycles.
Run the Device Finder program on the same network as the Model CNT‐IP‐
264 or any compatible Hall Research IP device in the network.
Enter the CNT‐IP‐264's IP address in a compatible web browser to access
the devices WEB Manger.
SOIP Feature in HHD‐264/FHD‐264
The CNT‐IP‐264 can use HHD‐264/FHD‐264 devices as a gateway to control
a serial device connected to the HHD‐264/FHD‐264 RS‐232 port.
Figure 1.2 Device Finder utility
Figure 1.3 SOIP Feature in HHD/FHD
CNT‐IP‐264 User's Manual
6
Advertisement
Table of Contents
