Setting The Dialing Mode; Setting The Ringer Tone/Volume; Turning Auto Talk On/Off; Turning Caller Id/Call Waiting On/Off - Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Owner's Manual

43-5521.fm Page 11 Monday, June 5, 2000 12:29 PM
Please call 1-800-THE-SHACK (1-800-843-
7422) for information on Ni-Cd battery recy-
cling and disposal bans/restrictions in your
area. RadioShack's involvement in this pro-
gram is part of the company's commitment to
preserving our environment and conserving
our natural resources.
SETTING THE DIALING
MODE
Set on the back of the base for
PULSE-TONE
the type of service you have. If you are not
sure which type you have, do this test after
you charge the handset's battery pack.
1. Set to
PULSE-TONE
2. Lift the handset, press
for a dial tone.
3. Press any number other than 0.
Note: If your phone system requires that
you dial an access code (9, for example)
before you dial an outside number, do
not press the access code, either.
If the dial tone stops , you have touch-
tone service. Leave
.
TONE
If the dial tone continues , you have
pulse service. Set
.
PULSE
4. Press or place the handset on the
TALK
base to hang up.
SETTING THE RINGER
TONE/VOLUME
You can select one of four different ringer
tone/volume settings on the handset. Re-
peatedly press
VOL/CID
during a call) to select the desired ringer set-
ting. Each time you press a button, the
phone rings at the selected setting and
.
TONE
, and listen
TALK
set to
PULSE-TONE
set to
PULSE-TONE
8 9
or (except
Installation
Ringer A High , Ringer A Low
er B High , or Ringer B Low
Note: Pressing
VOL/CID
9
or at
High VOL/CID
does not change the setting. Press the oppo-
site arrow key to change the setting.
TURNING AUTO TALK ON/
OFF
Your phone is preset so you must press
when you lift the handset from the base
TALK
to answer a call. With auto talk turned on,
you can answer a call by just lifting the hand-
set from the base. If the handset is away
from the base, you can answer by pressing
any key.
Follow these steps to turn auto talk on or off.
1. Lift the handset and hold down
menu appears with
selected.
2. Press
SELECT/CHANNEL
auto talk setting. On
3. Return the handset to the base or press
to store the new setting.
CID
TURNING CALLER ID/CALL
WAITING ON/OFF
If you subscribe to Call Waiting with Caller ID
service, you can set the phone to show Call-
er ID information for an incoming call even
while you are using the phone.
Follow these steps to turn the Caller ID/Call
Waiting feature on or off.
1. Lift the handset and hold down
2. Press or
2 VOL/CID
(Caller ID/Call Waiting).
, Ring-
appears.
8
at Ringer A
Ringer B Low
. A
CID
Auto Talk
to change the
or Off appears.
.
CID
9
to select CIDCW
11