Memory Dialing; Storing A Number In Memory; In The Handset - Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID Owner's Manual

ˆ

Memory Dialing

You can store up to 30 numbers in the hand-
set's memory and another 10 in the base's
memory, then dial a stored number by press-
ing a memory location number. You can also
store a name with each number in the hand-
set's memory.
Each number you store can be up to 20 dig-
its long, and each name can be up to 13
characters.
You cannot dial a number stored in one
memory location (the base or the handset)
using the keypad on the other.
STORING A NUMBER IN
MEMORY
Note: The phone beeps five times and exits
the storing process if you wait more than 20
seconds between each key press.

In the Handset

1. Lift the handset.
2. Hold down until
MEM
list of memory location numbers (and
names, if any) appears.
3. Select an empty memory location (or the
one you want to replace) by entering the
location number (
01
9 9 9 9
or /
INTCM CONF
list. Precede a single digit number with a
(for example, ,
0 01 02
Note: If the phone sounds five quick
beeps, you have made an entry error
and the number was not stored. Reenter
the location number correctly.
Ijeh[ DWc[ Ijeh[
Ijeh[ Ijeh[
4. Press .
SELECT/CH
If you do not want to enter a name, skip
to Step 6.
C[ceho C[ceho Ijeh[ Ijeh[
C[ceho C[ceho Ijeh[ Ijeh[
and a
8 8 8 8
– ) or using /
30
to scroll through the
, , and so on.).
03
DWc[
DWc[ DWc[
appears.
Memory Dialing
5. To enter a name, use the number keys.
Refer to the letters on the number keys
to select the desired letter. Press the key
once for the first letter in the upper case,
press twice for the second letter in the
upper case, and so on. To enter the
lower case letter, press four times (or
five times) to display the first letter in
lower case, five or six times for the sec-
ond letter, and so on.
For example, to enter John: press
@ @ @ @
once; upper case appears. Then press
six times; lower case
6
five times; lower case
4
Finally, press five times; lower case
6
appears.
To enter two letters from the same key in
7 7 7 7
a row, press / to move the cursor to
#
the next position. For example to enter
7 7 7 7
AB, press ; appears. Then press
2
7 7 7 7
, the cursor moves to the next posi-
tion, then press twice so
2
To enter a space, press
out entering any character.
To enter a number, repeatedly press the
corresponding number key until the
number appears.
To enter a special character, use
time you press , the following charac-
0
ters appear in this order:
& & & &
# – & ( ) (space)
If you make a mistake, use
7 7 7 7
or / to move the cursor over the
#
error, then enter the correct character, or
press / to delete a character. To
DEL VOL
delete all characters, hold down
for at least 1 second.
VOL
5
e e e e
appears. Press
^ ^ ^ ^
appears.
d d d d
/
#
8 8 8 8
appears.
7 7 7 7
/ twice with-
#
. Each
0
6 6 6 6
/ /
TONE
/
DEL
21