Table of Contents
Advertisement
ˆ
Troubleshooting
We do not expect you to have any problems with your phone, but if you do, the following sug-
gestions might help.
Problem
The phone does not work or works
poorly.
The handset stops working or works
poorly during a call.
Low volume of unusual sounds.
Severe noise interference.
The phone cannot be operated at a use-
ful distance from the base because the
signal becomes weak or noisy (hand-
set's range has decreased).
The handset battery pack does not
charge.
26
Suggestion
Be sure the base's phone line cord and AC adapter are cor-
rectly and securely connected.
Be sure the handset's battery pack is connected and charged.
Return the handset to the base for a few seconds to reset the
security access-protection code.
Move the handset closer to the base.
Lift the base's antenna to a vertical position.
Be sure the handset's battery pack is charged. (If the battery
Bem 8Wjj[ho
Bem
8Wjj[ho
Bem
Bem
8Wjj[ho
8Wjj[ho
power is too low,
display)
Someone has picked up another phone on the same phone
line. Hang up the other phone.
Keep the handset and base away from computers, remote
control toys, wireless microphones, alarm systems, intercoms,
room monitors, fluorescent lights, and electrical appliances.
Move to another location or turn off the source of the interfer-
ence.
Hang up and redial the number.
Lift the base's antenna to a vertical position.
Be sure neither antenna is touching a metal surface.
Recharge the battery pack.
Check the charging contacts on the handset and base. If they
are dirty, clean them with a pencil eraser.
Be sure the battery pack is connected correctly (see "Con-
necting, Charging, and Replacing the Battery Pack" on
Page 12).
Be sure the handset is properly seated on the base.
Replace the battery pack.
Troubleshooting
does not flash on the handset's
Advertisement
Table of Contents
