Power Off; Easy Pairing; Connecting (Previously Paired); Multi-Connection - LG Bluetooth HBS-250 User Manual

How to use

Power off

- Press and hold the PWR/CALL button for at least 5 seconds.
•
A tone will play, the Bluetooth link will disconnect, and the HBS-250
will turn off.
•
Make sure Button Hold Mode is turned off.

Easy Pairing

- With the HBS-250 off, Press and hold the PWR/CALL button for 2 seconds.
•
If the HBS-250 has never been connected with a Bluetooth device,
it will automatically enter pairing mode.
•
If the HBS-250 has previously been connected with the Handset,
it will automatically try to reconnect to that handset.
•
If the HBS-250 fails to reconnect to the handset, it will automatically
enter pairing mode.
•
When the device enters pairing mode, you will hear two short beeps
and the LED indicator will show a solid blue light.
•
Once in Pairing Mode, please follow these instructions:
▶ Using your Handset, find the Bluetooth Menu and "search for" or
"add" new devices.
▶ Select "LG HBS-250" from the list of devices and pair it with your handset.
▶ If asked for the Pass/PIN code during the pairing procedure,
please enter "0000" (4 zeros).
▶ After pairing successfully, be sure to "Connect" to the HBS-250.
▶ Once you have connected successfully, you will hear a beep.
▶ If you want to pair with other devices in the future, the HBS-250
must be placed into Pairing Mode.
▶ If the HBS-250 is in "Pairing Mode" for 3 minutes without being
paired to a device, the Headset will automatically turn off.
Pairing (Manual)
- Prior to using the Headset for the first time, you must pair it with a
Bluetooth-enabled handset.
- With the HBS-250 off, press and hold the PWR/CALL button for 5
seconds.
•
When the device enters pairing mode, you will hear two short beeps
and the LED indicator will shows a solid blue light.
•
Once in Pairing Mode, please follow the instructions above.

Connecting (Previously Paired)

If the HBS-250 has been previously paired with a handset, there are two
ways to connect the "HBS-250" to that Handset.
1. Connecting from the Handset to the HBS-250
•
From the Bluetooth menu, select the "connect" sub-menu.
•
Select "LG HBS-250" and connect.
6
2. Connecting from the HBS-250 to a Handset
Connecting (Previously Paired)
•
Press the PWR/CALL button for 2 seconds to power on the HBS-250.
•
If the "HBS-250" has previously been paired with the handset
successfully, it will automatically reconnect to that device.
[ Auto Reconnect ]
- When the HBS-250 is turned off while connected, the headset and
handset will disconnect. The headset and handset will automatically
reconnect without pairing, when the HBS-250 is turned back on, as
long as both devices are within the required range (33ft / 10meters).
[ Out of range ]
- When the HBS-250 and your handset are separated by a distance of
33 feet (10meters) or more, the HBS-250 and handset will disconnect.
When the handset and HBS-250 are brought back within the required
distance, the HBS-250 and handset will automatically reconnect.
- If the HBS-250 and handset do not automatically reconnect when
they are back within the required range, briefly press the PWR/CALL
button on the HBS-250 to reconnect manually.

Multi-connection

It is possible to connect your HBS-250 to two devices at the same time,
using Multi-Connection mode. In this mode the HBS-250 can be paired
to your handset (headset/hands-free profile) to make calls, and also paired
to a Bluetooth Stereo enabled device (A2DP profile) to listen to music.
In Multi-Connection mode, your handset can only be used to make/receive
calls, not to listen to music. To enter Multi-Connection mode:
1. Connect your HBS-250 to a handset (Handset must support the
headset/hands-free Bluetooth profiles).
2. Power off the HBS-250 by pressing the PWR/CALL button for 5 seconds.
(The Bluetooth connection with the handset will subsequently drop)
3. Place your HBS-250 into pairing mode (by pressing the PWR/CALL
button for 5 seconds). Pair/connect the HBS-250 to a Bluetooth Stereo
enabled audio device (not your handset). (This Bluetooth Stereo enabled
audio device must only support the A2DP/AVRCP profiles, not the
headset/hands-free profiles)
4. Once the Bluetooth Stereo enabled device is paired and connected,
press the PWR/CALL button once briefly on the HBS-250, to reconnect
with the handset (only the headset/handsfree profile will connect).
5. The handset is now paired with the headset/hands-free profile of the
HBS-250. The Bluetooth Stereo enabled audio device is paired with
A2DP/AVRCP stereo profiles.
* Note: In order to access Multi-Connection mode, at least one of the two devices
you are trying to connect to the HBS-250 must be able to select a profile, OR one
of the two devices must only support one profile (Either Headset/Hands-free or
A2DP/AVRCP). For example: Two handsets which support both the Headset/
Hands-free and A2DP/AVRCP profiles cannot be connected to the HBS-250
simultaneously. But, one handset supporting Headset/Hands-free/A2DP/AVRCP
and a Bluetooth Stereo Dongle supporting only A2DP/AVRCP is OK.
How to use
7