Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Free The Tone AS-1R
Summary of Contents for Free The Tone AS-1R
- Page 1 AS-1R/AMBI SPACE DIGITAL REVERB Owner’s Manual Ver 1.0...
- Page 2 Thank you for choosing a Free The Tone product. In order to take full advantage of the features Controls and indicators and performance it provides, please read this owner’s manual thoroughly, and keep it in a safe place for future reference.
-
Page 3: Controls And Indicators
This switch is used to select the input level of the and power supply capacity of higher than 280 mA, AS-1R to match the output level of the device to be such as the FREE THE TONE FA-9, can also be used. -
Page 4: When The Unit Is Put In Edit Mode From Manual Mode
Adjusting reverb (Manual mode) Changing/writing preset contents (Edit mode) Select one of the six reverb modes in the AMBI SPACE and adjust various parameters to create your desired When the LED above the EDIT switch illuminates, the unit is in Edit mode. Edit mode is used to change/write reverberation sound. -
Page 5: Correspondence Between Midi Receiving Channels And Preset Led Indications
Setting MIDI receiving channels Initializing 1. While holding down the PRESET select switch, turn on the power to the unit. Keep the switch pressed until 1. While holding down the MODE and PRESET select switches, turn on the power to the unit. both the PRESET and MANUAL LEDs illuminate. -
Page 6: Factory Presets
Turn off the unit and unplug the AC adapter from the Do not use solvents (such as benzine, paint thinner) on outlet and contact your local dealer or Free The Tone the unit, since these may dull the finish or damage the for repair in the case of any of the following: surface.
Need help?
Do you have a question about the AS-1R and is the answer not in the manual?
Questions and answers