Removingthesides - PIAGGIO X8 250 i.e Manual

N.B.
USE OF SPARK PLUGS OTHER THAN THE INDICATED TYPE OR UNSHIELDED
SPARK PLUG CAPS CAN LEAD TO FAULTS IN THE VEHICLE 'S ELECTRICAL
SYSTEM.
Electric characteristic
Spark plug
CHAMPION RG4 PHP
Electrode gap
0.7 - 0.8 mm

Removingthesides (03_08, 03_09, 03_10, 03_11, 03_12, 03_13,

03_14, 03_15, 03_16)
Proceed as follows:
1. Remove the pillion handle by loosening the two top, "A", and two bottom, "B", fixing
screws inside the helmet compartment.
2. Loosen the two side-fairing fixing screws, "C".
3. Remove the taillight by loosening the two fixing screws, "D", to be able to remove
the flashing turn indicator fixing screws, "I".
03_08
4. Loosen the side-faring screw, "E", underneath the turn signal light.
5. Remove the four side screws, "F".
6. Loosen the two screws "G" and hence remove the fairing mid-joining segment (de-
taching the license plate lamp connector), in order to allow for the removal of the
underlying fixings "H".
The figure shows the removal of the LHS fairing; the RHS may be removed following
the same procedure.
49