Warning/Safety Precautions - Made4.pet BC-2 User Manual

Warning/Safety precautions

1. The attached printed instruction manual is out of date, please use this
PDF copy to operate the device properly.
2. Do not allow your dog to chew on this collar. You should also attempt
to minimize scratching or clawing at the casing of the unit.
3. This device is made of plastic and electronic components that are not
digestible. Consult your local vet if your dog swallows any part of this
product.
4. The bark collar is not intended for use as a restraining collar. If you
are using a leash, use it with a separate restraining collar.
5. Always use the soft silicone protective caps over the metal electrodes
(prongs) to protect your dog's skin from pressure necrosis.
6. If the electrodes with silicone caps on directly touch the skin of your
dog (it's necessary if you use
the collar on your dog for more than 10 hours.
7. It is very important to make sure the collar is adjusted properly on
your dog's neck. Refer to
8. LCD will automatically turn off after 10 seconds to save power.
9. LED will blink slowly when the system is running.
10. LED will blink quickly when the battery voltage is low. Please replace
the battery.
11. If LCD indicates flashing "L", the battery is low. Please replace the
battery.
RED training
Strap length and collar placement
5
program) do not leave
section.