TechLogix Network TL-RKPS-01 User Manual page 18

Command
FB XX XX XX XX
XX XX XX XX XX
XX XX XX XX XX
XX XX FE
Note:
After sending the "Output/[x]V/[y]." to change the output voltage, the corresponding
l
output channel will be switch off, the command "[x]@." should be sent to switch on this
output channel again.
After sending the "LockKeyboard[x]." to lock the front panel, the device can be
l
controlled via RS232 commands and web-based GUI.
Function
Modify product model.
The command has 18 bytes in total, and
16 bytes are effective. The digit 0 is
used for padding.
For example: FB 54 50 55 48 2D 50 53
55 31 32 00 00 00 20 00 00 FE(TL-
RKPS-01)
10
TL-RKPS-01 User Manual
Feedback Example
www.tlnetworx.com