Integrated Heated Humidifier is designed only for use with specific BMC The RESmart is intended for use in the electromagnetic environment specified below. The user of the RESmart should make sure that it is used in such an environment. ®...
IMPORTANT! • Read all instructions before using the humidifier. The RESmart is intended for use in the electromagnetic environment specified below. The user of the • Use only with BMC RESmart devices whose instructions specify the use of this humidifier.
User Manual V2.6 EMC Requirements Guidance and manufacturer's declaration - electromagnetic emissions The RESmart is intended for use in the electromagnetic environment specified below. The user of the RESmart should ensure that it is used in such an environment. Emissions Test...
1. Connect the Humidifier to the RESmart device. Make sure they are connected completely. Degree of Protection Against Ingress of Water 2. Place the RESmart device and humidifier on a firm, flat surface at a level lower than your sleeping position. IPX1 –Drip-Proof, Vertical Heater Settings 1 to 5 (104 to 149°...
Avoid moving or tilting the humidifier when the water chamber has water in it. the humidifier. DO NOT immerse the humidifier into any fluids. 4. Press the humidifier button on the RESmart device after CPAP is blowing. The humidifier key will be lighted and the Water Chamber yellow indicator light on the humidifier will turn on.
Need help?
Do you have a question about the RESmart and is the answer not in the manual?
Questions and answers