Table of Contents
Advertisement
8.1.1.4 SMS Counter of SIM Card 1
Sent: Record the quantity of sent short message.
Received: Record the quantity of received short message.
You can click RESET with the touch pen to separately clear these two short message counters.
8
.1.1.5 GPRS Counter of SIM Card
Sent last time: Record the bytes sent last time.
Received last time: Record the bytes received last time.
Send all: Record the total bytes sent.
Receive all: Record the total bytes received.
Clear the counter: Clear the data and re-counter.
8.2 General Call Settings
8.2.1 Call Settings of SIM Card 1
Local number
System pre-settings: Sending the number or not applies the default value.
Hide the number: The opposite party cannot see this phone number during calls, it shall be
supported by the operator.
Send number: The opposite party may see this phone number during calls.
Call waiting: You can choose to turn on or off the call waiting functions, select INQUIRY to check the
current call waiting status.
call forwarding
Unconditional forwarding: When this function turns ON, the incoming calls may be forwarded to
the phone number you pre-set in any case.
Forward upon contact failure: When this function turns ON, the incoming calls may be forwarded
to the phone number you pre-set when the caller cannot contact with you.
No Answer Forward: When this function turns ON, the incoming calls may be forwarded to the
phone number you pre-set when your mobile phone does not answer the calls.
Forward on busy: When this function turns ON, the incoming calls may be forwarded to the phone
number you pre-set when your mobile phone is busy.
Forward all data incoming calls: When this function turns ON, the incoming calls may be
forwarded to the phone number you pre-set when the incoming calls are data calls.
Cancel to forward: Cancel all call forwarding services.
Call barring: Restrict the calls to be dialed.
Barring Outgoing calls: Restrict the outgoing calls.
Barring incoming calls: Restrict the incoming calls.
Cancel the barring: Cancel the pre-set barring by inputting the password.
Change the password: Change the password.
Line Switching: You can switch to Line 1 or 2, and Line 1 is the default one.
Note: If Line 2 is selected, ability to make outgoing calls depends on the services provided by network operator.
Close the groups: You can select the group list to be closed.
23
Advertisement
Table of Contents
