Call Services; Process Of Call; Operations Of Functions; Call Options - Kakatech KK Q8 User Manual

Gsm/gprs digital projector mobile phone
Table of Contents

Advertisement

4.5 Call Services

4.5.1 Process of Call

Access to the process of call when both ends are connected through.
Items displayed on the screen during calls include caller picture if you have set it; name or phone number;
call duration if you have activated this feature in the phone settings and SIM Card status of call.

4.5.2 Operations of Functions

Touch the options during calls with the touch pen to access the call service options; you can press the
Hookup key to hook up the present call;
Hookup key: It's used to hook up calls.
Left and right direction keys: It's used to switch over several calls.
Up and Down direction keys: It's used to adjust the volume of microphone.
Left function key: It's used to access the call options during calls.

4.5.3 Call Options

Access the call options in Call Interface with the touch pen. This interface is only visible during calls. You
can operate as below for Call Options:
Hold the single call: Pause one of calls during Multi-party Conversation.
End the single call: End the current call.
New conversation: When one of calls is paused during Multi-party Conversation, you can make a new call.
Telephone book: Access the telephone book menu.
Message center: Access the message menu.
Record: Record the conversation.
Mute: Turn on or off the mute mode.
DTMF: Send DTMF signals.
Note: Some menu options only appear in particular cases or should be supported by the local network

4.6 Auto DTMF

The phone will automatically access DTMF (automatically dial the extension number) when the numbers
inputted contain P after it is switched in.
the current call will be automatically held if you make new call.
16
.

Advertisement

Table of Contents
loading

Table of Contents