Equipment; General Overview; Main Characteristics; Specifications - LOTOS LTP5000D User Manual

Equipment

General Overview

The LTP5000D employs state of the art inverter technology. 50/60Hz frequency is inverted
to high frequency (over 100 KHz) by V-MOSFET followed by step down voltage and
rectification current.
Using Pulse-Width-Modulation (PWM) technology, the inverter power supply generates
powerful DC welding currents.
By applying switch power inverter technology, the dimensions and weight of the main
transformer is significantly reduced; while efficiency is increased by 30%.

Main Characteristics

• Stabilization
• Reliability
• Portability
Suitable for stainless steel, alloy steel, mild steel, copper aluminum and other metal
materials; there are many applications for plasma cutters.

Specifications

Input voltages
Input current
Recommended breaker
Output current
Duty cycle @ 40°C (104°F)
Dimensions with handle
Weight w/ 8'11'' (2.7 m) torch
Gas Supply
Recommended gas inlet
flow rate / pressure
Input power cable length
Power supply type
Accessories
• Power efficiency and low noise output
• High cutting speed
• Smooth cuts
15'' (381 mm) L; 6'' (152.4 mm) W; 12'' (304.8 mm) H
120-240 V, 1-PH, 50/60 Hz
120 V @ 40 A; 240 V @ 30 A
50 A @ 120 V; 40 A @ 240 V
10-50 A
60% @ 35 A, 120 V
60% @ 50 A, 240 V
22.5 lbs (10.2 kg)
3.6s cfm @ 65 psi
6' (1.8 m)
MOSFET
Plasma Torch (9' 9")
Plasma Consumables (installed on the torch head)
Air Filter/Regulator
Ground Clamp & Cable
Connections, (like Air Hose etc.) User
Manual
®
Air
9