Advertisement
Before you set up your monitor, please read all instructions and warnings carefully
and completely.
AC Adapter
Adapter Jack
The Parent's Unit receives sound from the Baby's Unit (transmitter) and is
powered either by three AAA batteries or by an AC adapter which is included.
1.
Check the channel switch. Ensure the Baby's Unit is set to the same channel
as the Parent's Unit.
2.
Move to a room away from the Baby's Unit.
3.
Place the Parent's Unit where you can easily monitor it by sight or sound.
You can use the Parent's unit three ways:
•
When using batteries, place it where you can easily see or hear it.
•
When using batteries, wear it using the belt clip.
•
When using the adapter, plug it into a standard wall outlet.
4
.
Turn on the Parent's Unit by rotating the
the volume. The Power Light will glow green.
5
.
Turn
OFF
6.
Have someone speak into the Baby's Unit to verify sound transmission.
Earphone
Jack
The Parent's Unit
the Parent's Unit when not in use.
Antenna
Channel
Speaker
Switch
ON/OFF
Green
Power Light
On/Off
Volume Dial
Sound Lights
Volume Control; adjust
Advertisement
