Advertisement
3. Thread a screw through each hole, letting the head
extend
1
/
inch from the wall.
8
4. Attach the mounting bracket to the system (see
"Attaching the Mounting Bracket" on Page 2).
5. Route the phone line cords and AC adapter cord through the
slots on the back of the bracket.
6. Line up the keyhole slots on the bracket with the screws in the
wall, then slide the system down onto the screws until it is
secure.
CHANGING THE TIME AND DATE DISPLAY
The time and date is automatically set when your system receives its
first call. This information is sent by the phone company.
To toggle between viewing the time in the 12- or 24-hour formats, re-
peatedly press
. To toggle between viewing the date format
DELETE
in month, then date (M/D), or date, then month (D/M), hold down
.
LETE
USING THE AUTO DIMMER
The display automatically adjusts its brightness according to the am-
bient light. If the ambient light is too strong, the display becomes
brighter; otherwise, it will be dimmer.
Note: The display has three brightness levels.
RECEIVING AND STORING CALLS
Caller ID is a service provided by your telephone company. When
you subscribe to this service, the telephone company sends the call-
er's telephone number (and name, if available) and the call's date
and time.
The system receives this information and displays the name (the
number will not display unless the caller name is not available) for
each call and updates the display with the current date and time.
Your system saves up to 50 call records, then replaces the oldest
call record with each new one.
During an incoming call, the LINE STATUS indicator flashes and
RINGING
appears on the display. Then
the caller's name (or the number if the name is not available). After
ringing stops by about 6 seconds, the call information is replaced by
the time display, and
NEW
flashes until you review the call records.
Note: If any phone connected to the same telephone line is picked
up, the LINE STATUS indicator lights.
REVIEWING CALL RECORDS
Each time you receive a call, the system saves a call record in mem-
ory that you can see while you are on the phone or review later.
To scroll through the call records, repeatedly press
Note: If no call information is stored,
6 6 6 6
7 7 7 7
press
or
.
REVIEW
For each call you review, the display shows the name for about 4
seconds, then the name is replaced by the call date and time (for
about 4 seconds). The number display appears for about 5 seconds,
then the display returns to the date and time display (unless you
6 6 6 6
7 7 7 7
press
or
).
REVIEW
After you review all calls,
END OF LIST
6 6 6 6
7 7 7 7
or
to view the calls again.
VIEW
/
Inch
1
8
DE-
NEW
appears, followed by
6 6 6 6
7 7 7 7
or
.
REVIEW
NO CALL
appears when you
appears. Press
RE-
3
Viewing Call Information
The caller ID displays the following information.
Display
Appears during an incoming
NEW
call and flashes when there
is a new call that has not
been reviewed.
Appears if you have
REPT
received the same phone
number more than once.
Number of call records, or
xx
number of new calls that
have not been reviewed, or
sequence number during
review.
M or MESSAGE
A message is waiting.
WAITING
The call is long distance.
LONG DISTANCE
The caller blocked the name
PRIVATE
and number information.
The caller is not within a
OUT OF AREA
Caller ID service area that
provides the name or
number.
The call was forwarded from
CALL FORWARD
a number set to forward all
calls.
Call information was
ERROR
distorted before reaching
the system.
Call information was not
NO DATA SENT
sent by the phone company.
The call was forwarded from
CALL FWD BUSY
a number set to forward a
call if the line is busy.
The call was forward from a
CALL FWD NO
number set to forward a call
ANS
if no one answered.
DELETING CALLS
Deleting a Single Call
6 6 6 6
1. Repeatedly press
REVIEW
you want to delete.
2. Press
.
appears.
DELETE
DELETE?
3. Press
again. The system deletes that record and auto-
DELETE
matically renumbers the remaining call records.
Or, to cancel deletion, do not press any button. After about 5
seconds, the time and date reappear.
Deleting All Calls
6 6 6 6
7 7 7 7
1. Press either
or
REVIEW
2. Hold down
until
DELETE ALL?
DELETE
3. When
appears, press
DELETE ALL?
appears.
Or, to cancel deletion, do not press any button. After about 8
seconds,
disappears.
DELETE ALL?
Description
7 7 7 7
or
until you see the call record
.
appears.
again.
DELETE
NO CALL
Advertisement
