Telephone jack requirements stopped the message. To use this phone, you must have an RJ11C modular telephone Won’t respond to remote commands jack. If you do not have a modular jack, please call your local telephone company to find out how to get one installed. (rotary) dialing.
Storing telephone numbers Base layout MENU SAVE MENU TO PB if necessary and press the button. Enter the name and press the MENU button. Edit the telephone number if necessary. Press the button for deleting the MUTE last character or press and HOLD for deleting the whole number. You can enter a dialing pause (approximately 3 seconds) by pressing the button.
Installing the phone Basic operation Answering a call Installing the Handset Battery Press the button, to answer a call. TALK Inserting the batteries Open the battery compartment cover. Put in the batteries. Close the battery Making a call compartment cover. Enter the phone number, using telephone key pad.
CAUTION: To reduce the risk of personal injury, fire, or damage use only the key pad and confirm with the MENU button. EM6113 power adaptor listed in the user’s guide. This power adaptor is intended to be correctly orientated in a vertical or floor mount position. Phonebook Answering machine You can store up to 50 entries in the phonebook.
Press bfiefly for confirmation, and to get to the next digits input. Follow this base’s PIN (EM6113 base station in delivery state “000”). The phone will ask “PRESS procedure for entering the digits and confirm by pressing . You will hear a repeat BASE”...
Handset name Enter the access code slowly after the beep (in delivery state “000”). You will hear two short tones for confirmation. In the idle state the handset name and the internal telephone number is shown in the You can now using the digit: display.
NOTE: Depending on (a) how the incoming caller’s phone number is formatted 3-Party conference when it is received, and (b) whether or not you previouslu pre-programmed your During an external call, press the button to enter the internal telephone number (1...5) local area code into the set up menu, you may need to adjust the format of the of the desired handset.