Connecting The Handset - Radio Shack Caller ID System 1500 Owner's Manual

43-976.fm Page 10 Monday, August 16, 1999 4:38 PM
5. Plug the other end of the modular
phone cord into a modular phone
jack.
6. Align the phone stand's keyhole
slots with the screw heads and
slide the phone down until it snaps
into place.

Connecting the Handset

1. Plug one end of the supplied
coiled cord into the modular jack
on the side of the phone, and the
other end into the modular jack on
the handset.
Note: RadioShack stores sell
longer coiled handset
which are especially useful when
you wall-mount the phone.
10
2. If you installed the phone on a
desk, simply place the handset in
the cradle.
If you mounted the phone on the
wall, slide out and rotate the hand-
set holder so you can hang the
handset on the base.
Note: You can place the handset
on the holder above the regular
handset holder. This gives you a
convenient place to temporarily
hang the handset without discon-
necting the call.
cords,