How To Fill - HoMedics UHE-WM250 Instruction Manual And Warranty Information

How to Fill

CAUTION: Before filling unit with water, turn the power off and unplug the unit from the outlet.
NOTE: Always use two hands to carry the water tank.
1. Grasp tank handle and lift up from humidifier base. (Fig. 2)
Fig. 2
Fig. 3
2. Turn the tank upside down—remove the tank cap by turning it
counter-clockwise. (Fig. 3)
Fig. 4
3. Fill the water tank with clean, cool (not cold) water. We
recommend using distilled water if you live in a hard water area.
(Fig. 4)
NOTE: Not for use with essential oils. Even a few drops can ruin the
Fig. 5
humidifier.
4. Replace the tank cap by turning clockwise until tight. (Fig. 5)
Fig. 6
5. Install the tank back on the base of the unit. Make sure the tank is
firmly seated. (Fig. 6)
6. Repeat the process for the 2nd tank.
NOTE: It is normal to have a small amount of water
in the base during and after use.
7