Cleaning And Care - HoMedics UHE-WM250 Instruction Manual And Warranty Information

Cleaning and Care

CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.
COOL
TIMER
% RH
MIST HUMIDISTAT
+
–
WARM LAMP
+
TIMER –
Fig. 10
MIST HUMIDISTAT
+
–
WARM LAMP
To Clean the Tank
Remove the water tanks from the humidifier base by lifting
them from the main unit. Unscrew the tank cap and rinse
inside the tank with clean water. (Fig. 7) To remove any scale
or build up, use a 50/50 mixture of vinegar and lukewarm water
to clean the inside of the tank.
Fig. 7
Suggestion: Clean the water tanks once every two to three
weeks, depending on your water conditions.
Fig. 8
To Clean the Ultrasonic Membrane
Remove transducer plate cover. (Fig. 8)
Pour a 50/50 mixture of vinegar and water on the surface of
the ultrasonic membrane, then soak for five minutes. Brush
clean with a soft-bristle brush (not included) and rinse. (Fig. 9)
Replace transducer plate cover.
NEVER touch the ultrasonic membrane with your fingers as
the natural oils in skin can damage the membrane.
Fig. 9
Suggestion: Clean the membrane once every two to three
weeks, depending on your water conditions.
NOTE: Never submerge the base in water or any liquid
To Clean the Surface
Clean the surface of the unit with a clean damp soft cloth as
often as needed. (Fig. 10)
9