How To Use; How To Fill; Night Light - HoMedics UHE-WM15TGT Manual

Cool & warm mist ultrasonic humidifier
Table of Contents

Advertisement

Available languages

Available languages

How To Use

Warm Mist
Button
Timer Button
Power ON/OFF Knob
Plug unit in to a 120 volt AC electrical outlet. Turn the mist adjustment knob clockwise to turn the
unit on. Turn the knob counter clockwise until it clicks to turn it off.
ATTENTION: When the water in the tank is almost empty, the humidifying function will power
off to indicate to the user to refill the tank.
Mist Adjustment Setting
Mist adjusts from Lowest output to Highest output. To increase the mist output, turn the MIST
adjustment knob clockwise. To decrease mist output, turn the MIST adjustment knob
counter-clockwise.
Mist Temperature Setting
When the humidifier is powered ON, it will be operating on the default setting—Cool Mist. To
change the Mist Temperature from Cool Mist to Warm Mist, press the WARM MIST button. The
mist temperature will change to Warm Mist, and WARM MIST button will be illuminated red. To
change the Mist Temperature back to Cool Mist, press the WARM MIST button again. The mist
temperature will change to Cool Mist, and the light in the WARM MIST button will turn off.
NOTE: Once warm mist is selected, it will take 30 minutes to heat up before the mist
becomes warm.

Night Light

Press the NIGHT LIGHT
button to turn on the tank light. The light at the bottom of the water
tank will turn on, illuminating the tank. Press the NIGHT LIGHT button again to turn the night
light off.
Timer
Press the TIMER button to cycle through the timer settings. Individual lights will indicate 1, 2, 4,
or 8 hour timer selections.
Night Light
ON/OFF Button
Mist Increase/
Decrease
Adjustment Knob
Fig. 2
6

How to Fill

CAUTION: Before filling unit with water, turn power off and unplug unit from the outlet.
NOTE: Always use two hands to carry the water tanks.
1. Grasp tank handle and lift up from humidifier base.
Fig. 3
Fig. 4
2. Turn the tank upside down—remove the tank cap by
3. Fill the water tank with clean, cool water. We
Fig. 5
Fig. 6
4. Replace the tank cap by turning clockwise until tight.
5. Install tank back on the base of the unit. Make sure
Fig. 7
NOTE: It is normal to have a small amount of water in
the base of the humidifier during and after use.
(Fig. 3)
turning it counter-clockwise. (Fig. 4)
recommend using distilled water if you live in a hard
water area. (Fig. 5)
(Fig. 6)
the tank is firmly seated. (Fig. 7)
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uhe-wm15

Table of Contents