DM Series Installation Guide
USB Driver Installer - Windows Installation
The example shown her illustrates the installation pro-
cedure using a Windows operating system. The screens
that appear at each step using another operating sys-
tem will vary, but the general steps are very similar.
Download the LecNet2/DM Series USB drivers from the
web sites under the SUPPORT tab at:
http://www.lectrosonics.com/US
http://www.lectrosonics.com/europe/
1. Launch the installer and follow the screen
prompts.
14
WDDISK
2. Click on Install USB Drivers (The installer will alert
you if you choose the wrong bit size.)
3. Follow the prompts to run the installer.
Or use the flash drive
supplied with the
processor.
Navigate to the USB
folder and click on
AutoRun.
LECTROSONICS, INC.
Need help?
Do you have a question about the DM1624F and is the answer not in the manual?
Questions and answers