Installing Lecnet2 ™ Software And Usb Driver; Installation With Lecnet2 Device Installer - Lectrosonics DM1624F Installation Manual

DM Series Installation Guide
Installing LecNet2
Software Installer - Windows Installation
The example shown her illustrates the installation pro-
cedure using a Windows operating system. The screens
that appear at each step using another operating sys-
tem will vary, but the general steps are very similar.
Download the LecNet2/DM Series Support software
installer from the web sites under the SUPPORT tab at:
http://www.lectrosonics.com/US
http://www.lectrosonics.com/europe/
1. Launch the installer and follow the screen
prompts.
12
Software and USB Driver
™
Or use the flash drive supplied with the processor.
WDDISK
2. Follow the prompts to run the LecNet2 Setup
Wizard.
LECTROSONICS, INC.