r
The equipment can be removed using the following procedure.
Base unit
Cabinet (upper)
Handset
Cabinet (rear)
Note : Follow the disassembly procedure in the numerical order given.
2-1. CABINET (UPPER)
Cabinet (upper)
Cabinet (lower)
1 Screws (+P 3x8)
2-2. BASE MAIN BOARD
SECTION 2
DISASSEMBLY
Base main board
Jack board (SPP-N1003 only)
2 Claw
2 Screws (+BTP 2.6x8)
Base main board
3 Remove solder
White
4
Hand main board
3
1 Screws (+BTP 2.6x8)
Red
– 6 –
Cabinet (upper)
Cabinet (lower)
1 Screw (+P 3x8)
Cabinet (lower)