MSI MS-98F5 Manual page 33

▶ Super IO Configuration
▶ Serial Port 1/ 2/ 3/ 4/ 5/ 6
This setting enables/disables the specified serial port.
▶ Change Settings
This setting is used to change the address & IRQ settings of the specified
serial port.
▶ Parallel Port
This setting enables/disables the parallel port.
▶ Change Settings
This setting is used to change the address & IRQ settings of the parallel
port.
▶ Device Mode
Select an operation mode for the parallel port.
▶ Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that generates
a reset when the software that it monitors does not respond as expected each
time the watch dog polls it.
▶ FIFO Mode
This setting controls the FIFO data transfer mode.
Industrial Computer Board
3-7