Table of Contents
Advertisement
2
x
Safety
2
Safety
2.1 Warning signs and explanation of
symbols
2.1.1 Meaning of the warnings
Warnings in this manual are classified according
into their severity and probability of occurrence.
DANGER!
Draws attention to imminent danger.
Disregarding this warning can lead to serious
injury or death.
WARNING!
Indicates a potentially dangerous situation.
Disregarding this warning may result in serious
physical injury or death.
CAUTION!
Indicates a situation which may cause possible
damage.
Disregarding this warning may cause damage
to property and the environment.
This symbol identifies user tips and par-
ticularly useful information, but not warn-
ings or hazards.
Special warning signs
Some types of danger are represented by
special warning symbols.
Electric current
Risk of burning or scalding
Danger of falling
Danger of falling parts
Planning and installation instructions
4
2.1.2 Handling instructions
● Handling instructions are shown as a list.
Actions for which the sequential order must be
maintained are numbered.
Results of actions are identified with an
arrow.
2.2 Avoiding danger
DAIKIN solar installations are state of the art and
are built to meet all recognised technical require-
ments. However, improper use may result in
serious physical injuries or death, as well as
property damage. To prevent such risks, install
and operate the DAIKIN solar installations only:
– as stipulated and in perfect condition,
– with an awareness of safety and the hazards
involved.
This assumes knowledge and use of the con-
tents of this manual, of the relevant accident pre-
vention regulations as well as the recognised
safety-related and occupational health rules.
2.3 Use as intended
The DAIKIN solar system may only be used for
the solar-supported heating of hot water
systems. The DAIKIN solar system must be in-
stalled, connected and operated only according
to the instructions in this manual.
Any other use outside the intended use is con-
sidered as improper. The operator alone shall
bear responsibility for any resulting damage.
Intended use also includes compliance with the
maintenance and service conditions. Re-
placement parts must at least satisfy the tech-
nical requirements defined by the manufacturer.
This is the case, for example, with original spare
parts.
EKSV21P + EKSV26P + EKSH26P
DAIKIN Solar P-SYS
008.1629544_01 – 12/2016
Advertisement
Table of Contents
