Opening / Closing - Phoenix SOLAR Basic Operating Instructions Manual

1.1 Opening
Example with factory code.
Button
1 2 3 4 5
After correct entries, the handle of the locking mechanism can be moved and the safe opened.
Only pull the handle once the lock has been completely opened (LED blinks 1x).
After an incorrect entry, the procedure can be repeated three times. Then, a blocking period
of 5 minutes goes into effect (manipulation block).
1.2 Closing
Ensure that the handle of the locking mechanism is completely in the closed position.
Button / example
C
After pressing the button
lock has locked. After locking, you must check whether the container is closed by pulling the handle
of the locking mechanism.
DS4650 Millenium Duplex Instructions

1. Opening / Closing

Signal
6
3sec
Signal
3sec
C
, the handle of the locking mechanism may not be pulled until the
Description
Code input
Correct
Description
Closing
Closed
Incorrect
5/13