Event Configuration; Event Servers - Axis 231D+/232D+ User Manual

AXIS 231D+/232D+ - Event Configuration
30

Event Configuration

This section describes how to configure the AXIS 231D+/232D+ for event handling. The
AXIS 231D+/232D+ can be configured to perform certain actions when certain types of
events occur.

Event Servers

Event Servers are used, e.g. for receiving uploaded image files and/or notification
messages. To set up Event server connections in your AXIS 231D+/232D+, go to Setup >
Event Configuration > Event Servers and enter the required information according to the
selected server type.
Server type
FTP Server
HTTP Server
TCP Server
For details on each setting, please refer to the online help files
from each web page.
When the setup is complete, the connection can be tested by clicking the Test button (the
connection test will take approximately 10 seconds).
Purpose
• used for uploading saved images
• used for notification messages
• used for uploading saved images
• used for notification messages
Requires information
• IP/Hostname
• Descriptive name of your choice
• User Name and Password (to FTP server)
• Descriptive name of your choice
• URL
• User Name and Password (to HTTP server)
• IP/Hostname
• Descriptive name of your choice
• Port number e.g. port 80
which are available