Remington S7300AU User Instructions page 7

Table of Contents

WET MODE - USE ON TOWEL DRIED HAIR

CAUTION: Ensure the vent holes are directed away from the face, neck and

scalp while using the straightener on wet mode.

NOTE: Do not use on dripping wet hair.

• Towel dry hair well before styling.

• When you turn on the straightener it will automatically set itself to wet mode.

• It will default to 200°C which is the minimum temperature required for Wet 2

Straight use. This is indicated by the cloud icon.

• Start styling on lower temperatures first. Select the appropriate temperature

for your hair type using the controls on the side of the product. '+' increases

the temperature '–' decreases the temperature.

• The temperature bars and digital display will stop flashing when the desired

temperature is reached.

• Working on one section at a time, run the straightener through the entire

length of the hair without stopping.

• When straightening wet hair you will hear a hissing sound and the unit will

steam. This is a good thing – it is the sound of excess water in your hair

evaporating and this is not harmful to the condition of your hair.

• After use, press and hold the off button for two seconds to turn off then

unplug the appliance.

• Let the appliance cool down before cleaning and storing away.

DRY MODE - USE ON DRY HAIR

NOTE: This straightener is not suitable for use on synthetic wigs or hair

extensions.

• Before use, ensure the hair is clean, dry and tangle-free.

• Start styling on lower temperatures first. Select appropriate temperature for

you hair type using the controls on the side of the product. '+' increases the

temperature '–' decreases the temperature.