Table of Contents
Advertisement
Set the Static Correction Level
Read all steps before attempting to set the static correction level.
1. Remove the clear plastic cover with the edge of the test light tool to expose the
correction level button (2C).
2. With the battery installed, press the correction level button and release when the
receiver LED indicator light lights up (2D).
3. The receiver LED indicator light will emit a series of flashes representing the static
correction level.
4. Increase the static correction level by pressing and releasing the correction level
button within 5 seconds of the previous series of flashes.
5. After setting the static correction level, replace the cover to protect the correction
level button.
The static correction levels increase in strength from 1 to 6. Pushing the correction
level button while the receiver collar is on level 6 will cause the receiver collar to revert
to level 1. Refer to the static correction level Table to choose the static correction level
that best fits your pet.
The receiver indicator light acts as a low battery indicator. The light will flash every 4 to
5 seconds when battery replacement is required.
Battery Contact Verification
Remove the receiver collar from your pet. Press the button and verify that the LED light illuminates. If the LED
light does not come on remove the battery. Locate the metal tabs in the battery compartment. Gently lift the
tabs to ensure that the battery will make good contact. Replace the battery into the receiver collar. Press the
button and check that the LED light illuminates.
Static Correction Level
1
2
3
4
5
6
Over Correction Protection
If your pet enters the boundary zone or continues anywhere beyond the pet area, this feature limits the static
correction duration to 30 seconds.
In the unlikely event that your pet leaves the pet area, he will not receive a static correction upon return to the
pet area.
Static Correction Level Table
Indicator Light Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
6 Flashes
Flashes once every 4 to 5 seconds
premierpet.com
2C
2D
Receiver Collar Function
No Static Correction, Tone-only
Low Static Correction
Medium-Low Static Correction
Medium Static Correction
Medium-High Static Correction
High Static Correction
Indicates Low Battery
7
Hide quick links:
Advertisement
Table of Contents
