Performax 241-0987 Operator's Manual page 17

1. Secure the workpiece.
2. Use C-clamps (available separately) to
clamp a straight edge to the workpiece.
3. Rest the front edge of the base on the
workpiece. Depress the trigger switch
to start the saw. Allow the saw to reach
full speed before engaging the blade in
the workpiece.
4. Move the saw into the workplace
and carefully guide the saw along the
straight edge to achieve a straight
rip cut.
5. After completing the cut, release the
trigger switch and allow the blade to
come to a complete stop. After the
blade has stopped, remove the saw
from the workpiece.
MAKING A BEVEL CUT (FIG.16)
Refer to "TO MAKE THE BEST POSSIBLE
CUT" sections for general instructions.
FIG. 16
OPERATION
1. Secure the workpiece with clamps.
2. Draw a line of cut on the workpiece.
3. Unplug the saw.
4. Adjust and secure the saw at the desired
bevel angle.
5. Connect the power cord of your
circular saw to a standard household
power outlet.
6. When making a bevel cut, hold the saw
firmly with both hands.
7. Rest the front edge of the base on the
workpiece. Depress the trigger switch
to start the saw. Allow the saw to reach
full speed before engaging the blade in
the workpiece.
8. Move the saw blade into the workpiece
and smoothly follow the line of cut.
9. After completing the cut, release the
trigger switch and allow the blade to
come to a complete stop. After the
blade has stopped, remove the saw
from the workpiece.
Line of cut
45° indicator
Page 16