Samsung POWERbot SR10M70 Series User Manual page 9

Accessories
or
Remote control
(Not included with
SR10M701✴✴✴ Series )
Docking station
✻ ✻ Refer to page 15 for the installation of boundary markers.
Installation note
Note
f Install the docking station in a place where the floor and wall are level.
f It is best to install the docking station along the grain of wooden floors.
f If the emergency switch is off, the POWERbot will not charge even if it is docked on the
docking station.
f Always turn on the power of the docking station.
– If power is not supplied to the docking station, the POWERbot cannot find it and cannot
automatically recharge.
– If the POWERbot is left detached from the docking station, the battery will drain naturally.
f If the POWERbot is in sleep mode, power will not come on even if the emergency switch
is turned off and then on. Press and hold the [Start/Stop] button on the POWERbot to turn
the sleep mode off.
Batteries (AAA type)
Power cord
ENGLISH-09
User manual
Battery charger
Spare filter
(Option)
Boundary markers
(Option)