Installing The Tool Box - Makita DVC863L Instruction Manual

Installing the polyethylene bag
Cleaner can also be used without polyethylene bag.
tank without letting your hands dirty.
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
1. 2. Polyethylene bag
Spread the bag around the top of the tank so that the
securely.
1
1.
NOTE:
recommended.
NOTE: Too much dust will tear the bag easily, so
do not collect the dust more than the half of the bag
capacity.
Emptying the polyethylene bag
WARNING:
cleaner is switched off and the battery cartridge is
removed before emptying the polyethylene bag.
CAUTION:
cause deformation and damage to the parts.
1
CAUTION:
although this depends on picked-up dust volume
in the tank. Or, the suction force will weaken and the
motor may be broken.
CAUTION:
ing the tank. Grabbing the hook may cause the hook
to break.
2
take the polyethylene bag out of the tank.
NOTE: Take the polyethylene bag carefully out of the
tank so that the polyethylene bag cannot be caught
and torn by the protrusion inside the tank when emp-
tying it.
NOTE:
becomes full. Too much dust in the tank may cause
the polyethylene bag to be torn.

Installing the tool box

1. Release the lock of the battery cover, and open
the battery cover.
2. Set the rails on the tool box along the grooves on
the housing.
3. Close the battery cover and apply the lock.
10 ENGLISH
Always make sure that the
Do not apply a great impact on the
Empty the tank at least once a day
Do not grab the hook when empty-