Table of Contents
Advertisement
Hibernate Suspend
In this mode, all system data are saved in the hard disk before powering down. When this mode is activated, all system state
and contents are saved to the hard disk drive after a period of inactivity defined by the user. No power or very little power
is drawn from the battery module under this mode.
However, depending on how much RAM that have been installed on your computer, the amount of time the system
requires to restore all its previous contents can range from 5 to 20 seconds.
For Windows 2000 / XP users, hibernation is handled by the operating system; therefore, no special disk partition or disk
file is necessary.
If you wish to activate Hibernate mode, you need enable Hibernate Support in the Hibernate tab of the Power Options
menu.
Note: Do not install or remove the memory module when the system is in the suspend mode.
Note: Actual dialogue box shown above may appear slightly different.
Power Button Action
The notebook PC's power button can be set to turn off the system or activate the suspend mode.
Go to [Start > Settings > Control Panel > Power Options] and click on the Advanced tab. In the pull-down menu, select
how you wish the power button to work as.
24
PRESTIGIO AVANTI 1770W
Advertisement
Table of Contents
