Setting The Iso; Setting The Exposure; Setting The Metering - Advent MP5 Instruction Book

Point the camera at a white piece of paper or similar object under the lighting conditions
for which you want to set the white balance, and then press the SET button.

Setting the ISO

With the initial settings, the ISO sensitivity is automatically set according to the brightness of the
subject.
Option
Auto
ISO 50
ISO 100
ISO 200
Higher ISO speeds increase the image noise. To take clean images, use as low an ISO
speed as possible.

Setting the Exposure

Set the exposure value manually to compensate for unusual lighting conditions such as indirect
indoor lighting, dark backgrounds, and strong backlighting.

Setting the Metering

There are 3 different light metering options available on your camera.
Option
Adjusts for fluorescent lighting. Corrects the green hue
of fluorescent lighting. Ideal for indoor photos under
fluorescent lighting without a flash.
For more accurate adjustment or when the light source
cannot be specified.
Sets the ISO sensitivity automatically.
Sets the sensitivity to ISO 50 equivalent.
Sets the sensitivity to ISO 100 equivalent.
Sets the sensitivity to ISO 200 equivalent.
Light is measured from the entire shooting screen, but
gives more importance to the values near the center.
Selects an exposure based on readings from multiple
points in the subject area
Selects an exposure based on a single reading taken
from the center of your picture.
- 26 -
NOTE:
Description
NOTE:
Description